What is InPlais Anti Slip Coating used for?
It is used to provide a durable, non-slip surface on floors, stairs, ramps, and other areas prone to slipping.
How do I apply InPlais Anti Slip Coating?
Clean the surface, then apply with a brush, roller, or spray according to product instructions.
How long does InPlais Anti Slip Coating take to dry?
Drying time is typically 2 to 4 hours depending on conditions.
Is InPlais Anti Slip Coating suitable for outdoor use?
Yes, it is formulated for both indoor and outdoor surfaces.
Can InPlais Anti Slip Coating be applied on wet surfaces?
No, surfaces must be clean and dry before application.
How long does the coating last?
It typically lasts 1 to 3 years depending on wear and environment.
Does InPlais Anti Slip Coating change the color of the surface?
It may slightly alter the surface sheen but is generally clear or lightly tinted.
Is the coating safe for barefoot traffic?
Yes, it is safe and comfortable for barefoot walking once cured.
Can InPlais Anti Slip Coating be used on wood?
Yes, it adheres well to properly prepared wood surfaces.
How thick should the coating be applied?
Apply a uniform, thin layer as recommended; multiple coats may be needed.
Can I apply InPlais over existing coatings?
Yes, if the existing coating is sound and properly prepared.
Is InPlais Anti Slip Coating waterproof?
Yes, it provides water-resistant non-slip properties.
How do I clean surfaces coated with InPlaise?
Clean with mild detergent and water; avoid harsh chemicals.
Does temperature affect drying time?
Yes, higher temperatures speed drying; low temps slow it down.
Can InPlais be used on metal surfaces?
Yes, with proper surface preparation.
Is InPlais coating environmentally friendly?
It is low VOC and safe when used as directed.
How do I prepare the surface before applying InPlaise?
Remove dirt, grease, and loose material; sand if necessary.
Can InPlaise Anti Slip Coating be applied on concrete?
Yes, it is commonly used on concrete floors and steps.
How many coats are recommended?
Usually 1-2 coats depending on the level of slip resistance required.
Can InPlais be tinted?
Some formulations allow tinting; check product specifications.
How resistant is the coating to abrasion?
It offers good abrasion resistance suitable for heavy foot traffic.
Can InPlais be applied over paint?
Yes, if paint is fully cured and well-adhered.
What tools can I use to apply InPlaise?
Brushes, rollers, or spray equipment.
Is the coating slippery when wet?
No, it enhances traction even when wet.
Can I walk on the surface immediately after application?
No, wait for full curing (typically 24 hours).
What is the recommended coverage rate?
Usually about 200–300 sq ft per gallon per coat.
How do I remove InPlais coating?
Mechanical abrasion or stripping agents may be required.
Can InPlaise be used on tile surfaces?
Yes, with proper cleaning and surface prep.
Does InPlais affect surface texture?
It adds a subtle texture to increase grip without being rough.
Can InPlais be used on stairs?
Yes, it is ideal for stair treads and nosing.
Is InPlais resistant to chemicals?
It has moderate chemical resistance; avoid harsh solvents.
Can InPlais be applied in humid conditions?
High humidity may extend drying time.
Does InPlais emit fumes during application?
It has low VOC content and minimal odor.
Can I apply InPlais over epoxy flooring?
Yes, if epoxy is fully cured and prepared.
How do I test slip resistance after application?
Use standardized slip resistance testing equipment.
Is InPlais suitable for commercial use?
Yes, it meets standards for commercial flooring.
Can InPlaise be used on plastic surfaces?
It may adhere poorly; test before full application.
What is the drying temperature range?
Ideal between 50°F and 85°F (10°C–29°C).
How flexible is the cured coating?
It is flexible to accommodate substrate movement.
Can InPlais be recoated?
Yes, with proper surface cleaning between coats.
Does the coating resist mold and mildew?
It has some resistance but regular cleaning is recommended.
Can InPlais be applied on rubber flooring?
Adhesion may vary; test before application.
How long before rain or water exposure?
Allow at least 24 hours curing before exposure.
Can InPlais be diluted?
No, use as supplied for best performance.
What personal protective equipment is needed?
Gloves and eye protection recommended.
Can InPlais cause staining?
Generally no, but test on porous surfaces first.
How does InPlais perform on oily surfaces?
Poor adhesion unless surface is thoroughly cleaned.
Is InPlaise compatible with sealers?
Usually applied after sealing, but check compatibility.
What is the VOC content of InPlais?
It has low VOC to comply with environmental regulations.
Can InPlais be used in food processing areas?
Check product certification for food-safe areas.
