Vacuum Chamber with Pump
4-Gal. Vacuum Chamber with 1.5 CFM Vacuum Pump
Vacuum Chamber System includes ArtMolds' 4-Gal. Vacuum Chamber and Matched 1.5 CFM Vacuum Pump.
ArtMolds Vacuum Chamber
To assure a bubble-free mold when mixing rubbers and silicones a vacuum chamber is required. The ArtMolds' Vacuum Chamber is designed for deairing (eliminating air bubbles) in rubbers. This PVC chamber, along with two ½-inch Lexan plates make a safe and efficient unit. The vacuum chamber comes with all fittings, exhaust valve, vacuum gauge, rubber gaskets, and top and bottom ½-inch clear Lexan plates.
Capacity: 4-gallons (approximately)
Dimensions: 10-inch diameter by 10-inch tall
Maximum Pull: 29.9-inches of mercury (Hg) at sea level 24.87 hg at elevation of Denver, CO
Weight: 20-pounds / Shipping weight 22-pounds
1.5 CFM Vacuum Pump
Ultimate vacuum: 75 microns
Internal check valve to prevent escape of liquid oil
1/4 horsepower motor
Pump speed: 1720 RPM
Includes easily accessible oil fill port
This deep vacuum pump includes T-fitting with 1/4" flare and 1/2" ACME ports Vapor discharge/Oil fill port. Other features include: thermally protected motor with on/off rocker switch, high volume cooling fan provides cool air to motor and pump, large oil level sight glass with min-max. oil level indicator, large, lightweight reinforced base for stable positioning, cooling fins keep temperature cooler during extended motor operation and an easily accessible oil drain valve. Electrical specs: 110V / 60 Hz.
Write Your Own Review
Data not found.
We found other products you might like!
- Por-A-Mold -- Urethane Mold Rubbers
Starting at $61.99
- SkinRite 10 Translucent Special F/X Silicone
Starting at $41.95
- Food Safe Silicone -- BakeSil FDA Approved
Starting at $27.95