Mold Making Materials

Mold Making Materials

View as Grid List

8 Items

per page
Set Descending Direction
View as Grid List

8 Items

per page
Set Descending Direction

EnvironMolds offers a great variety of mold making systems - one just perfect for your application. Whether you need a skin safe mold material such as alginate or skin safe silicone such as LifeRite we have it for you and everything in between. You should also view our mold making kits. We have the greatest selection of life casting and molding and casting kits anywhere in one place. Most of our kits are beginner oriented resulting in high quality professional results, even for first-timers. The advantage of our casting kits for the beginner is that each kit contains all the material needed for the finished project. Once you have completed the kit you will know what raw materials to buy to complete another casting.

It is all here release agents, silicone rubber, polyurethane rubber, plaster bandages, liquid latex, clay and waxes, ceramic supplies, alginates and moulage, and yes, even prop food items added to the product mix made from the mold making and casting materials available from the EnvironMolds website.

Mold Making Materials Introduction

Welcome! You are in great company for mold making and molding materials whose history of mold making by man goes as far back as 300 BC during the Bronze age where stone molds have been recovered which were used to cast bronze spear tips. A mold can be as primitive as a dinosaur track where the mud of the footprint has hardened over time in rock to form the matrix. It could be as complicated a multi-part aluminum injection mold used in the manufacture of plastic parts.

The type of mold that one makes is often depend on the type of casting material that will be used to replicate the original. Since this site offers  mold making materials that can be readily used at home or in a small studio we will skip the explanation on molds which are required for furnaces to prepare the casting materials... But still it will be helpful to the types of present day molds that are utilized to reproduce castings. To begin with a mold is a basic shape or matrix that can be filled with a pliable material or liquid that when cured takes the shape of the original that the mold was made to copy.

Mold Making Material Types

There are number of types of molds to name a few: blow, injection, matrix, extrusion, rotational, spin and transfer. The majority of which require specialized equipment to complete the process. Here we will be concerned with the types of mold constructions which can be created by you. These include blanket molds, box molds, two-part or complex molds and injection molds.

Finally, an explanation is in order for the types of mold making materials by which molds are constructed. Most mold making materials are utilized are made from natural or manmade rubber because of their flexibility and the ability to reproduce extraordinary detail. But some molds are made with more rigid materials such as gypsum plasters. The most common mold rubbers are natural latex, polyurethane, epoxy and silicone. These groups also breakdown into category types. For example, there are two types of natural latex, one used for mold making while other is used for casting. Silicone has two distinct families, a condensation cure and an addition cure. One is best suited for a certain project over the other. So you need to become familiar with which materials will provide the best results.

Not to be concerned, because throughout this website every material category page has an explanation of the best way to use it in your mold making construction.

Most Common Mold types

Blanket Mold

This is by far the easiest type of mold. It is often use to reproduce plaques and models in which one side is not covered by mold material. In this process, the original is fixed to a base usually with hot glue and the molding material is poured over it and allowed to cure. When set, the mold is flipped over and the original removed to reveal the blanket mold ready for casting material.

Block Mold

In this process, the original is fastened inside a mold box or container. The mold material is introduced and filled to about one inch higher than the highest part of the original. When the mold is removed from the box or its container it resembles a block of mold material, thus its name. To remove the original a slice is made on each side of the rubber the going two-thirds down. The mold is spread open like a clam shell and the original is removed. A rubber band is used to keep the mold closed when the casting material is poured.

Two-Part or Complex Mold

For a complicated original, a more complicated mold must be constructed. First one side is molded, followed by the other side. Or if even more complicated addition mold pieces need to be made.

Injection Mold

This type of mold is made is the original is thin walled and requires help other than gravity to insert the casting material. A two part mold is often the basis for a rubber injection mold. Once the mold is completed sprue holes are added to allow air and excess casting material to escape. Then a large hypodermic needle (usually a horse hypodermic) is filled with the casting material and squeezed into a hole opposite the sprues until the casting material begins to exit the sprues holes.

Release Agent

Most mold materials require a release agent to prevent item from sticking the original. Silicone often does need a release. Carefully read the instructions on each mold making material so you are aware of what type of release agent you may need.

Shell Mold

Most molds are two parts. The first part is the soft rubber which takes the actual impression of the original. This material is thin and flexible and if removed from the original will not keep its original form. So an added rigid layer is added on top of the rubber known as a shell or mother mold. Gypsum plaster and plaster bandages made an inexpensive shell


Category bar
 Alginates and Moulage Line  Ceramic Supplies Line   Clays and Waxes Line  Faux Fake Food
 ALGINATES and MOULAGE  CERAMIC SUPPLIES  CLAYS and WAXES  FAUX / FAKE FOOD
  LifeMold Alginate 3-4 Min Set  Porcelain Powder 325-mesh  Del Milano Plasticine Clay   Micro-crystalline Modeling Wax  Chocolate Glazed Bunt Cake 
  Hollywood Impressions
 Dresden Pottery Clay  Chavant - Plasteline - Brown  MoldGel Traditiojall Regular Set   ArtMolds Sodium Silicate  Roma Plastilina Clay   Duncan Donut Coffee Spill
  MoldGel SILFREE - SloSet   CastRite Art Casting Stone  Ballistic  - Roma Plastilina No1  Decorated Petit Fours
 FiberGel E F/X - Hi Strength    Dresden Pottery Clay  
     Artware Pottery Clay Eartheware
     Boneware Gray Self-Hardening
     Boneware Red Self-Hardening
     Alcohol Lamp for Clay / Wax  
     Paraffin Wax 
     Pure Beeswax  
     French Casting Wax 
     Roman Casting Wax 
   
      
     

  
 Liquid Latex Mold Rubber Line  Life Casting Kits Line   Life Casting Supplies Line  Mask Making Supplies
 LATEX MOLD RUBBERS  LIFE CASTING KITS  LIFE CASTING SUPPLIES  MASK SUPPLIES   
 Kreemtex Liquid Latex  Mold It Hand Casting Kit  Cotton Roll  Del Milano Plasticine Clay
 Latex EZ Casting Kit  Kidz EZ Cast Kit   PopArt Plaster Bandages  RD-407 Mask Making Latex
 Colored Liquid Latex - DipKote  Baby N' Me Baby Casting Kit  MoldEZ Hair and Mold Release  EnvironMolds Latex  Rubber
 Mold Builder Liquid Latex  Praying Hands Casting Kit  LifeRite Skin Safe Silicone  CastRite Art Casting Stone
 RubRfil Latex Mold Filler
 Pearhead Babyprints w Frame   AlgiSlo - Alginate Miracle  PopArt Plaster Bandages
 
 EZ Torso Belly Casting Kit  CastRite Art Casting Stone  Gypsona Plaster Bandage
 
 Pro Hand Casting Kit  MoldGel Alginate Regular Set  Instant Mold Plaster Bandage
   Face Casting Kit  MoldGel Alginate SloSet  Styrofoam Head Model
 
 My Breast Friends Casting Kit  FiberGel E F/X Grade  Cirius Latex Pigments
   Faux Bronze Finishing Kit  MoldGel SILFREE - Regular Set  
   Head Portrait Casting Kit  Hollywood Impressions  
   Full Torso Casting Kit  Instant Mold Plaster Bandage  
   Full Body Casting Kit    
  Life Casting Kits Refills     
     
       

 Molding and Casting Kits Line  Plaster Bandages Line   Polyureathane Rubbers Line  Por-a-Mold
 MOLDING / CASTING KITS  PLASTER BANDAGES  POLYURETHANE RUBBERS  POR-A-MOLD and KAST 
  Faux Bronze Finishing Kit  PopArt Plaster Bandages  PanoCast Enlarges 160%
 Por-A-Kast II
  Claystone Craft Kit  Por-A-Mold -- Mold Rubbers
  Punk'd Art Kit - 25 Students      
  Part Making Casting Kits      
  Latex EZ Casting Kit      
         
       

  Line  Relaese Agents Line   Silicone Mold Rubbers Line  
   RELEASE AGENTS  SILICONE MOLD RUBBERS  
   MoldEZ Hair and Mold Release  Cirius Silicone Paints 2-Oz  
     LifeRite Skin Safe Silicone   
     Food Safe -- BakeSil  
       
        

 

Copyright © 2017 EnvironMolds LLC. All rights reserved.