Brass Powder 325 mesh
PURE BRASS METAL POWDER FOR COLD CASTING
YES, THERE IS A DIFFERENCE BETWEEN BRANDS.
WE OFFER SUPERIOR QUALITY AT EXTRAORDINARY PRICES!
This is a fine grade of 325 mesh the correct fineness for cold casting. Brass or other metallic powder is added to polyester resin, polyurethane resin, epoxy, gypsum cement or other binders. Small objects are cast and cured in suitable molds. To conserve metal when casting large pieces you can dust (salt) the mold surface, brush a thin coating on the surface, spread or roll the metal on or spray a thin coating. The mold is then back filled with resin or fiberglass, iron or steel shot, sand or calcium carbonate to increase the weight to give it the heft and feel of a hot foundry ‘pour.’
You can also lighten the piece by added hollow glass beads to your back up casting mix. After curing and removal from the mold the object must be gently abraded or burnished with fine steel wool (triple 0 grade), a Scotch Brite® pad, or sand blasted to remove the microscopic film of binder from the surface of the metal particles. This exposes the pure metal beneath. Click here to download information of creating cold casting pieces. The object will have the authentic look and feel of a true hot metal foundry casting. That is because the surface is now true metal. It then can be naturally oxidized or patinated to achieve an antique look.
You can downloada Cold Casting Project PDF sheet here.
- KastEZ Resin for Easy Casting
Starting at $24.95
- AquaClear Clear Casting Resin
Starting at $43.95