Order by phone... 1-866-278-6653 / 1-908-273-5401

Marble Powder -50-lb

When combined with CastRite, KastEZ or AquaClear resin in a 1/3 - 2/3rds ratio our marble powder provides a simulated marble finish to your castings

Be the first to review this product


Availability: In stock

Price: $219.95


Marble Powder -50-lbMarble Powder -50-lb
Move your mouse over image or click to enlarge

  • Marble or other stone powders are added to polyester resin, polyurethane resin, epoxy, gypsum cement or other binders. Small objects are cast and cured in suitable molds. To conserve marble or stone owders when casting large pieces you can dust (salt) the mold surface, brush a thin coating on the surface, spread or roll the powder on or spray a thin coating. The mold is then back filled with resin or fiberglass, iron or steel shot, sand or calcium carbonate to increase the weight to give it the heft and feel of a hot foundry ‘pour.’ You can also lighten the piece by added hollow glass beads to your back up casting mix. After curing and removal from the mold the object must be gently abraded or burnished with fine steel wool (triple 0 grade), a Scotch Brite® pad, or sand blasted to remove the microscopic film of binder from the surface of the metal particles. This exposes the pure metal beneath. Click here to download information of creating cold casting pieces. The object will have the authentic look and feel of a marble carving. That is because the surface is now true marble.

Additional Information

Free Shipping N/A