PanoCast 160 Increases Castings by 160%
Increase the size of your casting by 160% Using this specially formulated urethane. Submerge the casting in water and it magically increases uniformly in size.
|Introducing . . .|
|Increase the size of your lifecasting or sculpture 160% at a time! Yes, believe it!
PanoCast 160 is thebrand new casting/molding material the everyone is talking about. It lets you increase any lifecasting or sculpture to any size without sculpting, pantograph or expensive computer aided machinery.
PanoCast 160 captures the exact detail as you scale up every time! Imagine the time and labor savings!
This amazing urethane based formula breakthrough allows you to increase size by 160% at a time. Greater sizes are achieved by creating a second mother mold and recasting with PanoCast 160.
How it Works. Create a mold of a subject of your choice. Mix 1 part A to 1 part B. You have a working time of 10-minutes. Pour PanoCast 160 into your mold or slush cast. Cure twenty-four to thirty-six hours. (PanoCast 160 will cure to a 45 Shore A.)
Free your casting from the mold and submerge in water. Within days PanoCast 160 grows to up 160 percent of its original size. After soaking in water for 14 days @ 72° F PanoCast 160 will have a hardness rating of Shore 35 A.
By making successive molds from larger PanoCast 160 castings, very large reproductions can be made without sculpting. When PanoCast 160 is finished growing, a new master mold of the expanded shape can be made from plaster or urethane.
Ideal thickness of the PanoCast 160 cast is 2 1/2 inches or less so that water can be properly absorbed. It may be necessary to make holes in thicker parts of your casting to allow water access to the PanoCast 160. The holes may then be repaired in the final casting.
The size of the finished casting is limited only to the size of the vessel holding the water for the PanoCast 160.
PanoCast 160 is packaged in quantities of 2-pints and 2-gallons and 5-gallons. Exclusive from ArtMolds:
Mold Making, Casting Products and Kits: If an ArtMolds branded product purchased from artmolds.com proves to be defective in normal use within six months of its purchase or damaged during shipping, we will refund your purchase price or replace the item. Please note that most mold making and casting product such as polyurethanes, silicones and silicone paint medium have a six month shelf life. This warranty excludes damage to liquid latex products if frozen during transit (other than shipping overnight) or as a result of storage in freezing temperature environments.
Mechanical Products and Tools: If an ArtMolds-brand product purchased from artmolds.com proves to be defective in normal use within one year of purchase, or damaged during shipping, we will refund your purchase price or replace the item.
Other Products: For non ArtMolds-branded products, some products are covered by extended manufacturer’s warranties. Please contact either the manufacturer or our customer service for more information about these warranties.
Returns: If the product proves defective during the limited warranty period of six months, and you follow the return instructions provided by our customer service, then at your option, we will either provide you with a new replacement product or a refund. Products Purchased through Dealers: If you purchased any EnvironMolds item through an EnvironMolds dealer you must contact the dealer for replacement and or refund.
- MoldRite 25 Silicone - Classic Mold Making Silicone
Starting at $41.95
- ArtLube-100 Rapid Mold Release
Starting at $15.95
- CastRite Art Casting Stone
Starting at $21.95
- Pressure Pot for Resin Casting$199.95