Order by phone... 1-866-278-6653 / 1-908-273-5401

Swipe to the left

Which Type of Alginate Is Better for Molds?

Which Type of Alginate Is Better for Molds?
By Adams Xiao 2 months ago 41 Views No comments

Which alginate formulation you need for your project will be determined by a number of factors, but the kind of casting or molding that you're doing will certainly be one of the most important variables. However, stretching, flexibility, and rigidity are also important things to consider. For more on which type of alginate is better for specific molds and uses, you can continue reading below.

The Best Alginate

There are a number of different skin-safe formulations for molds, but the need and use can vary quite a bit. Do you need a bucket mold or a layup mold? Bucket molds are often used for hand casting, but ultimately a bucket mold can be used for many objects that can be submerged. The mixed alginate will flow around the immersed object and form to fit it. This is great for hand molds, but that's certainly not the only possibility. The casting material for a bucket mold should be flexible and pliable enough to be removed from the item without tearing or losing its shape. Layup molds are a bit different. Layup molds are great for body casting and face casting. When the mixed alginate is applied for a layup mold, it should be thick, not unlike a cake frosting. It should be applied in a thin layer on the subject for casting. This can be done for partial torsos or full-body casting. If the alginate is thicker, there will be less dripping, and you'll wind up wasting far less material.

Many alginate formulations will fall into two distinct categories: there are waste molds, which are water based, and moulage, which can be reused. Both can offer skin-safe casting. The waste molds are only usable for maybe one or two applications; thus, they're designed to be disposable. These water-based molds are highly pliable, so they're ideal for bucket molds. They tend to work well for submerged subjects. Moulage is thicker, and you'll probably use it for a layup mold. It's excellent for torso casting and, if mixed properly, it should have minimal dripping.

Ultimately, the alginate mold you need will have to be decided by you, and it will vary from project to project as assessed by your specific needs and preferences. However, it's a good idea to know more about your options and the pros and cons of the different alginate formulations. A little bit of research can help you avoid big headaches later.